NOCO Boost Plus GB40 Manual PDF: A Comprehensive Guide
Welcome to your comprehensive guide to the NOCO Boost Plus GB40! This guide provides a detailed overview of the GB40. Access the user manual in PDF format, ensuring you have all the information for safe and effective use.
The NOCO Boost Plus GB40 is a compact, yet powerful lithium-ion jump starter designed for 12-volt lead-acid batteries. It’s suitable for cars, boats, motorcycles, ATVs, lawnmowers, RVs, tractors, trucks, and more. The GB40 is engineered with user safety in mind, featuring spark-proof technology and reverse polarity protection, making it safe for anyone to use.
This ultra-portable device can instantly jump-start most vehicles. The GB40 isn’t just a jump starter; it also functions as a portable power bank, equipped with a USB port for charging smartphones, tablets, and other USB devices. It also includes an integrated LED flashlight with multiple modes, including SOS and emergency strobe, providing added safety and convenience.
Before using the NOCO Genius Boost GB40, it is important to read and understand the user guide. The manual offers comprehensive information on safety precautions, operation instructions, troubleshooting tips, and warranty details. This guide will help you maximize the benefits of your GB40 while ensuring safe and reliable performance. The NOCO Boost Plus GB40 is designed for easy operation and is a must-have tool for any vehicle owner.
Key Features and Specifications of the GB40
The NOCO Boost Plus GB40 boasts several impressive features and specifications that make it a standout jump starter. One of its primary features is its jump-starting capability, which allows it to jump-start 12-volt lead-acid batteries down to 2 volts. For batteries below 2 volts, a manual override mode is available.
The GB40 provides 1,000 peak amps, delivering substantial power for jump-starting a wide range of vehicles. Its internal lithium-ion battery can provide up to 20 jump starts on a single charge. The device is equipped with a USB port for charging mobile devices, offering a convenient power source on the go. The integrated LED flashlight features seven modes, including SOS and emergency strobe, enhancing visibility and safety in various situations.
The GB40 is designed with safety in mind, incorporating spark-proof technology and reverse polarity protection to prevent damage and injury. It includes a high-discharge lithium-ion battery, ensuring reliable performance and longevity. The unit can be fully recharged in approximately 3 hours using a USB charging cable and a 2.1A power adapter. Its compact design and lightweight construction make it easy to store and transport, making it an essential tool for any vehicle.
Safety Warnings and Precautions
Before using the NOCO Boost Plus GB40, it is crucial to understand and adhere to all safety warnings and precautions. Failure to do so may result in electrical shock, explosion, fire, serious injury, death, or property damage. Always read and understand the user guide before operating the product.
Never attempt to jump-start a damaged or frozen battery. Use the GB40 only with 12-volt lead-acid batteries. Do not leave the product unattended while in use. Ensure that the battery clamps are securely connected to the correct terminals, observing proper polarity. Incorrect connections can cause sparks, explosions, and damage to the vehicle’s electrical system and the GB40 itself. Avoid using the GB40 in wet or damp environments, as moisture can increase the risk of electrical shock.
Inspect the GB40 and its cables regularly for any signs of damage, such as cuts, deformations, or abnormal occurrences. If any damage is detected, discontinue use immediately and contact NOCO support. Do not disassemble or modify the GB40, as this will void the warranty and may compromise its safety features. When charging the GB40, use only the included USB charging cable and a compatible power adapter. Following these precautions will ensure safe and effective use of the NOCO Boost Plus GB40.
How to Use the NOCO Boost Plus GB40
Using the NOCO Boost Plus GB40 is straightforward, but it’s crucial to follow the steps carefully to ensure safety and effectiveness. First, ensure the GB40 is adequately charged. The indicator lights will show the charge level. Connect the clamps to the GB40, ensuring they are securely attached.
Next, identify the positive (+) and negative (-) terminals on the vehicle’s battery. Connect the red clamp to the positive terminal and the black clamp to the negative terminal. Make sure the connections are clean and free of corrosion for optimal performance. If the clamps are connected in reverse polarity, the GB40’s reverse polarity protection feature will activate, preventing damage to the unit and the vehicle.
Once the clamps are correctly connected, turn on the GB40 by pressing the power button. The boost LED will illuminate, indicating that the unit is ready to jump-start the vehicle. Attempt to start the vehicle. If it doesn’t start immediately, wait 20-30 seconds and try again. Do not attempt to start the vehicle more than three times in a row, as this could damage the battery or the starter motor. After the vehicle starts, disconnect the clamps in reverse order (black first, then red) and turn off the GB40. Store the GB40 in a safe place.
Jump Starting Procedure
The jump-starting procedure with the NOCO Boost Plus GB40 is designed to be safe and efficient. Begin by ensuring the GB40 is powered off before connecting any clamps. Attach the red clamp to the positive (+) terminal of the dead battery. Then, attach the black clamp to the negative (-) terminal of the battery or a suitable grounded metal surface away from the battery.
Once the clamps are securely connected, double-check that they are properly attached and free from any corrosion. Power on the GB40 by pressing the power button. The boost LED indicator will light up, signaling that the unit is ready to deliver a jump start. Proceed to start the vehicle’s engine. If the engine doesn’t start immediately, wait for approximately 20 to 30 seconds to allow the GB40 to provide a sufficient charge to the battery.
After waiting, try starting the engine again. If it still doesn’t start, check the connections and ensure the GB40 is fully charged. Avoid attempting more than three consecutive jump starts to prevent potential damage. Once the vehicle starts, disconnect the negative clamp first, followed by the positive clamp. Power off the GB40 and store it in a safe, dry place.
Battery Charging Instructions
To ensure your NOCO Boost Plus GB40 is always ready for use, proper charging is essential. The GB40 can be charged using the included USB charging cable. Connect the USB cable to the USB IN port on the GB40 and plug the other end into a USB power adapter. NOCO recommends using a 10W USB power adapter for optimal charging speed; however, a 5W adapter can also be used, though it will charge at a slower rate.
During charging, the charging indicator LEDs will illuminate, indicating the current charge level. All four LEDs will light up when the GB40 is fully charged. Charging time can vary depending on the power adapter used and the initial charge level of the GB40. Typically, a full charge can take between 3 to 6 hours with a 10W adapter.
It is crucial to avoid using damaged or non-compliant USB cables or power adapters, as this may lead to inefficient charging or potential damage to the device. Do not leave the GB40 unattended while charging and disconnect it once fully charged. Store the GB40 in a cool, dry place away from direct sunlight and extreme temperatures when not in use to prolong its battery life.
Troubleshooting Common Issues
Encountering issues with your NOCO Boost Plus GB40? Here are some common problems and their solutions. If the GB40 fails to charge, ensure the USB cable and power adapter are functioning correctly. Try a different cable and adapter to rule out any hardware malfunctions. Check the USB IN port for any debris or damage that may be preventing a proper connection.
If the GB40 does not jump-start a vehicle, ensure the battery clamps are securely attached to the correct terminals (red to positive, black to negative). Verify that the vehicle’s battery voltage is within the GB40’s operating range. If the battery is deeply discharged (below 2 volts), the manual override function may be necessary; consult the user manual for instructions on using this feature.
If the GB40 displays error codes or unusual behavior, consult the troubleshooting section of the user manual for specific guidance. For issues not covered in the manual or persistent problems, contact NOCO customer support for further assistance. Avoid disassembling the GB40, as this will void the warranty. Always follow safety precautions and operating instructions to prevent damage or injury.
Technical Specifications
The NOCO Boost Plus GB40 boasts impressive technical specifications, making it a powerful and reliable jump starter. It features a lithium-ion battery with a 1000 amp peak current, enabling it to jump-start gasoline engines up to 6 liters and diesel engines up to 3 liters. The GB40 is designed for 12-volt lead-acid batteries and is equipped with spark-proof technology and reverse polarity protection for enhanced safety.
The GB40 also functions as a portable power bank with a USB port for charging smartphones, tablets, and other USB devices. Its internal battery has a capacity of 2.1 Amp hour making it ideal for topping off the battery of your phone in an emergency. It also includes a 100 lumen LED flashlight with seven modes, including SOS and emergency strobe. The unit is compact and lightweight, weighing just 2.4 pounds. The charging input is 5V 2.1A with full recharge time being three hours.
The GB40 operates in a wide temperature range, making it suitable for various climates. Its rugged design ensures durability and resistance to impacts and water splashes.
Warranty Information
The NOCO Genius Boost GB40 comes with a limited one-year warranty from the date of purchase, protecting against defects in materials and workmanship. This warranty is non-transferable and applies only to the original purchaser. To make a warranty claim, you typically need to provide proof of purchase, such as a receipt or invoice, and a detailed description of the issue.
The warranty does not cover damages resulting from misuse, abuse, neglect, accidents, alterations, or unauthorized repairs. It also excludes normal wear and tear, cosmetic damage, and damages caused by external factors such as water or fire. NOCO’s obligation under this warranty is limited to repairing or replacing the defective product, at their discretion.
To initiate a warranty claim, you should contact NOCO’s customer support through their website or by phone. They may require you to return the product for inspection, and you may be responsible for shipping costs. Always refer to the official warranty document included with your GB40 for the most accurate and up-to-date information, as terms and conditions can change. Remember to register your product online to streamline any potential warranty claims.
Contacting NOCO Support
Need assistance with your NOCO Boost Plus GB40? NOCO provides several avenues for reaching their support team. For prompt assistance, visit their official website, no.co, where you can find a comprehensive FAQ section addressing common queries. Additionally, the website offers a contact form for submitting specific questions or issues you may encounter.
If you prefer direct communication, NOCO’s customer support team can be reached via email at support@no.co. For phone support, consult the NOCO website for the appropriate phone number based on your region. When contacting support, have your GB40 model number and purchase date readily available to expedite the process.
NOCO’s mailing address for written correspondence is 30339 Diamond Parkway, 102 Glenwillow, OH 44139, United States of America. Remember to clearly state your issue and include relevant details for a quicker resolution. Before reaching out, review the troubleshooting section in the GB40 manual PDF for potential solutions to common problems. Always check the NOCO website for the latest contact information, as it may be subject to change.